Interfaces

DALI 0-10V PWM

The DALI 0-10V PWM interface converts DALI signals into a electrically isolated PWM signal and offers easy integration of electronic ballasts with PWM control input in a DALI-system (e.g for Meanwell HLG, HLN, NPF or LPF series).

DALI Device Type 5 (IEC62386-206) compatible: selection of linear or logarithmic dimming curve, selection of 0-10V (0-100% PWM) or 1-10V (10-100%) output range

 

DALI 0-10V PWM

DALI 0-10V LE

The DALI 0-10V interface converts DALI signals into a analogue 0-10V voltage signal and offers easy integration of electronic ballasts with electrically isolated 0-10V or 1-10V control input in a DALI-system (e.g. for OSRAM 981677 Optotronic OT 80/220-240/24 DIM P). 

DALI Device Type 5 (IEC62386-206) compatible: selection of linear or logarithmic dimming curve, selection of  0-10V or 1-10V output range

DALI 0-10V LE

DALI 0-10V AN

The DALI 0-10V interface converts DALI signals into a electrically isolated analogue 1-10V signal and offers easy integration of electronic ballasts with 1-10V control input in a DALI-system.

DALI Device Type 5 (IEC62386-206) compatible: selection of linear or logarithmic dimming curve

DALI 0-10V AN

DALI PWM

The DALI PWM interface converts DALI signals into a electrically isolated PWM signal and offers easy integration of electronic ballasts with PWM control input in a DALI-system (e.g for Meanwell HLG, HLN, NPF or LPF series). Suitable for the control of mulitple ballasts. 

DALI Device Type 5 (IEC62386-206) compatible: selection of linear or logarithmic dimming curve, selection of output range (0-100% PWM / 10-100% PWM)

 

DALI PWM

DALI RM8/0-10V / DALI RM16/0-10V

The RM8/16/0-10V module is a DALI 0-10V/PWM combined with a switching relayWith the integrated relay the power supply of LED- ballasts can be turned on and off. 

DALI RM8/0-10V / DALI RM16/0-10V

0-10V to DALI

0-10V to DALI interface for the conversion of 0-10V input voltages to DALI dimlevels. The conversion characteristic can be configured with the help of the DALI Cockpit.

Suitable for din rail mounting.

 

0-10V to DALI

0-10V to DALI Converter 10mA

Compact interface module for the conversion of 0-10V control signals to DALI direct arc power dim levels. The interface module provides a DALI sub-line power supply for up to 4 standard DALI ballasts.

Various preconfigured types available, varying in dimming range (1%-100%, 10%-100%) and  Off-function. 

0-10V to DALI Converter 10mA

0-10V to DALI Converter 30mA

Interface Module for the conversion of 0-10V analog signals to DALI dimlevels. The module provides an internal DALI bus power supply for up to 10 ballasts (30mA). The device offers active and passive 0-10V input, the configuration of the dimcharacteristic can be set up easily with the help of jumpers. Suitable for din rail mounting.

 

0-10V to DALI Converter 30mA

DALI DSI

Converter for DALI bus to DSI signals to integrate DSI-based control gears in DALI lighting systems. This compact module is easily installed in conventional flush-mounted wall outlets and integrates DSI-based ballasts such as PCA ECO for fluorescent light tubes, TEL transformers for halogen lamps, or phase dimmers PHD in a DALI bus-based lighting control system. The Dali-DSI interface receives a dedicated unique address via the bus and can be assigned to groups as well as scenes.

DALI DSI

DALI DT8toDT6

DAL interface module for converting DT8-Tc control commands in 2 DT6 dim levels

DALI DT8toDT6

DALI 4Net Basic

Central Control for up to 4 DALI-lines

  • Independent control of up to 256 DALI ballasts
  • Confiuration via Ethernet with PC software tool DALI-Cockpit
  • Modbus to DALI Gateway
  • Modbus TCP-Access for control and visualisation
  • Multimaster Capability: several DALI control devices on each DALI-line
  • Dinrail mounting (1TE)

Last recent firmware: V 0.1.0

DALI 4Net Basic

DALI USB

The DALI USB is a PC-USB interface module for DALI systems.

This interface allows addressing, programming and controlling DALI installations and control gear using installation software via a PC.

DALI USB

DALI SCI RS232

Serial interface to connect a PC or PLC control unit to a DALI line. 
Suitable for DIN rail mounting.

DALI SCI RS232