- DALI systems
- Drive Technology
Controls & HMIs
DALI Display 7"
DALI operating and control unit with touch panel.
- Light management system for 2 DALI circuits (for up to 128 DALI control devices)
- Commissioning, control and operating unit
- Dimming and switching, manual or time-controlled recall of scenes
- Day by day sequence program (schedule)
- Labeling of scenes, groups, sequences and schedules
- Mode for RGB color lighting management and color temperature control
- Recall of cicadian daylight curves
- Human centric lighting
- 7 inch color touch screen with 24-bit color depth
- Background wall illumination with RGB LEDs
- 2 DALI interfaces, 1 USB port, 1 Ethernet port
- Control and software update via Ethernet
- Power over Ethernet capable
- Customized Sites (Manual, Examples)
Last Recent Firmware: V107 (Download)
DALI operating and control unit with up to 6 freely configurable keys. Multi-functional touch panel to control DALI systems. It is possible to choose between various preset functions.
For example, the DALI Touchpanel enables the control of different light groups, the recall of predefined lighting scenes or the direct control of color and brightness. The design of the DALI Touchpanel provides remarkable flexibility: the operating panel can be adjusted to any application and environment simply by using different printed labeling sheets. The DALI Touchpanel has multi-master capability, i.e., several control modules can be installed parallel in a DALI-line.
DALI Switch Cross
The multifunctional switch module is a DALI control device with four programmable pushbuttons. Destination address, switching mode and DALI-commands can be assigned to each momentary switch. Beside the standard functions like dim up, dim down, off, recall min., recall max., goto scene 1-16, direct arcpower ...%, mask, predefined macros and commands for colour temperature control supported as well.
Compact DALI presence detector with integrated light and temperature sensor. Multimaster capable.
The sensor controls DALI-lines directly or can alternatively just be used as sensor unit.
The module is suitable for light control as well as in combination with air condition and sun-blind systems.
The DALI CS can be easily installed in recessed conduit boxes or directly on cavity walls, types for surface mounting and suspended ceilings available.
The DALI LS automatically conrols the light level of luminaires or groups of them. With the help of the rotary switch at the backside of the module the reference light level can be set.
The measured light level can be queried vie the DALI-line as well.
DALI Temp PT1000
With the help of the DALI Temp module temperature can be measured and queried.
The internal temperature sensor can be used as well as an external PT1000. Hence it is suitable for measuring ambient, flow and return temperatures.
The DALI MC+ module is based on the DALI MC but offers some additional features. The inputs can either process switching signals or analogue signals from potentiometer. In addition, the scope of functions has been extended by DALI-commands for colour temperature adjustment.
The DALI MC4L module is an input device with 4 galvanic isolated switching inputs for mains voltage!
Various DALI commands can be assigned to each button: dim up, dim down, recall min., recall max., goto scene 1-16, direct arcpower …%, mask and predefined macros.
The compact DALI MC4L module can be fitted in the flush-type box behind the switch, type for dinrail mounting available.
The DALI 100k device makes it possible to control the brightness of lamps on a DALI-line with a 100kohm-potentiometer.
DALI GC / GC-A
DALI GC and GC-A are control modules for 2 DALI groups. Dimming and switching commands can be sent by light switches or pushbuttons to two DALI groups with the help of this compact module. A rotary switch on the housing of the DALI GC offers the possibility of preselecting the desired DALI or lighting group.
The module can be placed behind a standard sunken light switch and is powered directly by the DALI bus.
DALI SC / SC-A
The DALI SC / SC-A is a control unit for calling up DALI scenes
By means of a rotary switch it is possible to define which of the 16 scenes is loaded when pressing a pushbutton. The 4 independent pushbutton inputs can thus be assigned to 4 light scenes. The module can be placed behind a standard sunken light switch. In this way the standard light switch becomes a DALI scene switch. The module is powered by the DALI bus.
Central Control of up to 4 DALI lines:
- independent control of up to 256 DALI ballasts
- Confiuration via Ethernet with PC software tool DALI-Cockpit
- Modbus to DALI Gateway
- Modbus TCP access for control and visualisation
- Multimaster Capability: several DALI control devices on each DALI-line
- crossline control function for input devices
- central scheduler
- Future functions (available by firmware update): crossline control functions for sensors, sequencer, emergency ...
- Dinrail mounting (1TE)
last recent firmware: V 0.4.0
The DALI sequencer is a control unit for calling up DALI scenes. Dynamic scene retrievals can be processed as well as custom defined command sequences.
DALI RTC Timer
This moduls offers a week-based scheduler function for DALI commands with a RTC (quarz based). Supporting up to 14 scheduler entries.
The DALI CDC is used for daytime based adjustment of the color temperature of tunable white capable DALI DT8 luminaires or. The characteristic can be adapted to the respective application.